Quartz watch cleaning

1. Clean the circuit with a professional cleaning solution. The quartz watch circuit is composed of a solid circuit, a quartz watch resonator, a trimmer capacitor, and a printed circuit board. Due to the particularity of the electronic components of the watch, its cleaning is generally carried out using 99% anhydrous alcohol (anhydrous ethanol) or chloroethylene. It can be put into the container during cleaning, but the time does not need to be too long. Please wash it gently by washing it. After taking it out, blow it dry or dry with a blown ball, then clean it with silk cloth or long profit.

    

    

  2. Gently clean the coil holder with a softer brush. Precautions for cleaning the quartz watch coil frame The wire diameter of the quartz watch coil is not protected by the outer layer. It cannot be cleaned in the container when washing. Generally, the coil cannot be held by hand. The correct method is to hold the magnetically conductive ends of the coil frame by hand. The softer brush can be cleaned gently (do not break the coil lead wire at the lead plate solder joint). The quartz watch coil lead plate is not cleaned with gasoline.

3. Wipe the motor with a rubber sticky or willow strip. When cleaning the watch motor, it should be noted that the matching of the magnetic steel and the copper sleeve of the quartz watch motor rotor is glued by the metal glue, so it cannot be cleaned with the cleaning liquid. Generally, it can be wiped with rubber glue or willow strip, and then treated with a brush. clean.

Precautions

      Do not abuse the cleaning solution when cleaning, otherwise it will affect the quality of the quartz watch components.